22
HPIIISi TWINAX CARD
Command:
04, User-Defined Strings
Description:
Creates user-defined strings to be sent to the printer. Place up to 25 pairs of
hex codes, corresponding to your desired printer commands, inside a pair of
parentheses following the main command argument (the string number).
Each numbered string is stored in the Card’s memory. To send a given string,
place a “&%U
n
” (where
n
is the string number) in the document.
For a list of available printer commands and their hex values, consult your
printer’s manual.
Possible Arguments:
Results:
0 to 9([hex codes])
Defines a numbered user string consisting of the
specified hex codes.
0 to 9()
Deletes the specified string from memory.
Example:
“&%Z04,3(1826643044)” defines a string that tells the printer to start
underlining. After defining this string, place “&%U3” in your document
wherever you want the printer to start underlining.
Command:
05, Host Language
Description:
Use this command to select the international character set to be used by your
twinax host when it receives the “Use Default Language” command. See your
printer’s operator’s manual for more information on character sets. When
you select a new host language, it remains in effect
permanently
until you
specifically select a different language—even restoring factory defaults
doesn’t change this setting.
Possible
Results:
Arguments:
00
Multinational
*01
US/Canada
02
Austria/Germany
03
Belgium
04
Brazil
05
Canada (French)
06
Denmark/Norway
07
Finland/Sweden
