Black Box mm146, User Manual

Page: 58 / 85

56
Using the Supervisor PIN Mode During a Call
You can change Far End preset if the following are true:
• The unit being called has Supervisor Mode turned ON .
• The unit being called has Remote Access turned ON .
• The correct Supervisor PIN is entered.
To set up video presets on a remote videophone:
1.
Press the
menu
button, then press the
start
button twice. The
Manual Dial screen is displayed.
2.
Use the number keys to enter the IP address in the Addr field of the party you
wish to call.
3.
Use the Down arrow key to highlight the PIN field. Use the number keys to
enter the four digit Supervisor PIN.
4.
Press the start button to dial your call.
5.
When the call is connected, press the
source
key. The transparent
arrow facing away from you indicates FAR end camera control. The
transparent S at the bottom left corner of the screen indicates Supervisor
Mode.
6.
Press a number key between 1 and 3 to select the video source you wish to
view.
7.
Use the zoom in and zoom out buttons along with the arrow keys to
pan/tilt/zoom the view you wish to save.
8.
Press the round arrow center button twice followed by a number key, to save
as your preset.
9.
Repeat steps 7 to 9 as necessary.