Black Box mm146, User Manual

Page: 32 / 85

30
Making a Call Using Manual Dialing
To make a manual dialed call:
1.
From the idle screen or Setup Menu, press the start button twice. The
Manual Dial screen is displayed.
2.
Select the required call type and banwidth using the left & right arrow keys in
the Type field. If you wish to call a standard telephone or mobile, select
Analog.
3.
In the Addr field, use the number keys on the key pad to enter the IP address
you want to call. Use the * key (located at the bottom left of the key pad) or
enter a space using the Right arrow key to represent a period in the IP address.
4.
Alternatively, instead of entering the IP address, you can enter the name in the
Name field, providing Gatekeeper is enabled. You must enter this name
exactly as it is stored in the system, such as “JOHNDOE”. Adjust the case by
pressing and holding the keys if necessary.
5.
If the person you are calling requires PIN authorization, in the PIN field use
the remote control to enter the PIN.
6.
Press the start button to dial your call.
The message “ Dialling x.x.x.x, User Found, Connecting” is displayed.
7.
To end the call, replace the handset.