33
CHAPTER 9: Radio-Transmission Parameters
9. Radio-Transmission Parameters
(3) Edit Radio Transmission Characteristics
When item (3) is selected in the main menu, the screen in Figure 9-1 appears. This
screen allows you to modify the radio-transmission characteristics of the Modems.
As stated in the warning, these parameters are for the sophisticated user who has a
good understanding of the principles of radio data transmission. They should be
changed only after consulting this manual.
The radio parameters between any Modems in communication will be determined
by the settings for the master (except when in Multipoint mode; see (4) RF Data
Rate
in this section). While the settings may be modified for the slave(s) and/or
repeaters, they will be overridden by the master’s parameters.
Figure 9-1. The RF115 Radio Parameters Menu.
Terminal-TERMINAL.TRM
File Edit Settings Phone Transfers Help
(0)
Set Operation Mode
(1)
Set Baud Rate
(2)
Edit Call Book
(3)
Edit Radio Transmission Characteristics
(4)
Show Radio Statistics
(5)
Edit MultiPoint Parameters
(Esc) Exit Setup
Enter Choice 3
WARNING: Do not change parameters without reading manual
(0)
FreqKey
5
(1)
Max Packet Size
8
(2)
Min Packet Size
2
(3)
Xmit Rate
1
(4)
RF Data Rate
3
(5)
RF Xmit Power
9
(6)
Slave Security
0
(7)
RTS to CTS
0
(8)
Retry Time Out
255
(Esc) Exit to Main Menu
MAIN MENU
Version 4.56 02-20-96
Standard Hop Table
Modem Serial Number 554-0002
RADIO PARAMETERS
Summary of Contents for MD3310-R2
Page 3: ......
