Black Box MD3310-R2, User Manual

Page: 22 / 50

19
CHAPTER 5: Operation Mode Selections
Table 5-2. Mode 6 Script File Commands
Script File Command Function Controlled
ATXF_ Frequency Key
ATXT_ Max Packet Size
ATXD_ Min Packet Size
ATXX_ Transmit Rate
ATXR_ RF Data Rate
ATXP_ RF Transmit Power
ATDT_ Position in Call Book to Call
ATD_ Allows specific RF115 Serial Number to be entered to call
ATXC_ Used in conjunction with the ATD command, instructs
Modems which repeater path to follow
ATXS Instructs Modem to go into Setup Mode
Using Mode 6 to call a modem not listed in the Call Book
Mode 6 will accept the command ATD#######, where ####### is any arbitrary
modem serial number, such as 5XX1234. Upon receipt of this command, the
modem will call that modem even though the number is not in the sending
modem’s Call Book. The modem will use the repeater(s) specified in the Call
Book. This means it is now possible to call an unlimited number of slaves through
script files in mode 6 and have up to 10 different repeater combinations.
To use the features:
1. If you will use one or two repeaters, they must first be set up in the Call Book.
Do this by setting up a number to call (this may be a dummy number) through
the repeater(s) that you will use.
2. Issue the command ATXC#, where # corresponds to the position in the Call
Book where the repeater(s) is/are located.
3. Issue the command ATD#######, where ####### is the serial number of the
modem with which you are attempting a link. The modem will link first to the
repeater(s) specified and then to the slave modem.