51
7. Setting Country/Regional Codes
Countries or regions vary in their requirements for how a modem functions. Therefore, you must configure
your modem to match the defaults of your country or region. Choose from any of the three methods:
• Using the LCD panel to set your country or region code.
• Using the global wizard to set your country or region code.
• Using AT commands to set your country or region code.
7.1 Using the LCD Panel
1. Start at the Status LCD and use
↓
to move down the menu tree to the Region Select LCD.
2. Use
→
to move from the Region Select LCD across the Region Settings Options LCD to the Current
Setting LCD.
3. If the current setting shown is not the one for your region, use the arrow keys to get to the Region Profile
LCD. The question mark represents the question: Is this the region you want? If B5 is the one you want,
press
Enter
; if it’s not the one you want, use the arrow keys to get to the code you want. The region code
for Japan is 00.
4. When you reach the region code you want, press
Enter
. You will then see the message Option Set.
5. After setting the region profile, you can cycle the power to the modem (turn it off and then back on
again) or use the arrows to move back and up the menu tree to return to the Status LCD.
CHAPTER 7: Setting Country/Regional Codes
Summary of Contents for MD1650A-JP
Page 2: ......
