V.92 DIALUP 2-WIRE OR 4-WIRE LEASED-LINE DATA/FAX MODEM AT COMMANDS GUIDE
42
S-Reg
Unit
Range
Default
Description
S86 (continued)
25
Extension pickup detected.
26
Remote hang up detected.
S95
decimal
0–255
0
Extended Result Codes Control: A bit set to a 1 in this
register, in conjunction with the W command, enables the
corresponding result code. The +MR, +ER, and +DR
settings also control S95 bits 2, 3, and 5 respectively. The
more recent settings of +MR, +ER, and +DR, or host writing
of S95 bits 2, 3, and 5, along with the W command setting,
determine the corresponding actual result code reporting
(see +MR, +ER, +DR, and W commands).
Default: 0
Bit 0
CONNECT result code indicates DCE speed
instead of DTE speed.
Bit 1
Append/ARQ to CONNECT XXX result code
in error-correction mode (XXXX=rate).
Bit 2
MCR: XXXX result code
(XXXX=modulation) and +MRR: XXXX result
code (XXXX=rate). (Also see +MR.)
Bit 3
ER XXXX result code
(XXXX=protocol identifier).
Bit 5
DR XXXX result code
(XXXX=compression type).
Summary of Contents for MD1650A-JP
Page 2: ......
