V.92 DIALUP 2-WIRE OR 4-WIRE LEASED-LINE DATA/FAX MODEM AT COMMANDS GUIDE
44
Terse
Verbose
Description
4
ERROR
3. Command parameter within command line is outside permitted range.
(continued)
For X0, X1, X2, and X3, this message is sent instead of DELAYED and
BLACKLISTED.
5
CONNECT
1200 connected at 1200 bps. Modem connects to the line. Either the line
speed is 1200 bps and DCE speed reporting is enabled, or DTE speed is
1200 bps and DTE speed reporting is enabled.
6
NO DIAL TONE
No dial tone detected. For X2 and X4, the modem has been instructed to
wait for dial tone during dialing but none is received.
7
BUSY
Busy signal detected. For X3 and X4, if busy tone detection is enforced, the
busy (engaged) signal is detected on the line when the modem is
attempting to originate a call.
8
NO ANSWER
No answer at remote end. Modem is trying to originate a call if a
continuous ringback signal detected online until the expiration of timer
S7.
9
CONNECT 600
Connected at 600 bps; speed reporting enabled. Modem connects to the
line, the DTE speed is 600 bps, and speed reporting is enabled.
10
CONNECT 2400
Connected at 2400 bps; speed reporting enabled. Modem connects to the
line; either the line speed is 2400 bps with speed reporting enabled, or the
DTE speed is 2400 bps and the DTE speed reporting is enabled.
11
CONNECT 4800
Connected at 4800 bps and speed reporting enabled. Modem connects to
the line; either the line speed is 4800 bps with DCE speed reporting
enabled, or the DTE speed is 4800 bps and the DTE speed reporting is
enabled.
12
CONNECT 9600
Connected at 9600 bps and speed reporting enabled. Modem connects to
the line; either the line speed is 9600 bps with DCE speed reporting
enabled, or the DTE speed is 9600 bps and the DTE speed reporting is
enabled.
13
CONNECT 7200
Connected at 7200 bps and speed reporting enabled. Modem connects to
the line at 7200 bps and DCE speed reporting enabled.
14
CONNECT 12000 Connected at 12,000 bps and speed reporting enabled. Modem connects to
the line at 12,000 bps and DCE speed reporting enabled.
15
CONNECT 14400 Connected at 14,400 bps and speed reporting enabled. Modem connects to
the line at 14,400 bps and DCE speed reporting enabled.
16
CONNECT 19200 Connected at 19,200 bps and speed reporting enabled. Modem connects to
the line; either line speed is 19,200 bps with DCE speed reporting enabled,
or DTE speed is 19,200 bps and DTE speed reporting is enabled.
Summary of Contents for MD1650A-JP
Page 2: ......
