Black Box MD1650A-JP, Reference Manual

Page: 23 / 56

CHAPTER 2: AT Commands
21
Values: 0, 1
<value> Decimal number corresponding to the desired operation.
0
Do not allow the quick connect profile to be saved.
1 Allow the quick connect profile to be saved. Default
Result Codes: OK 0 or 1 in V.92 Mode (+MS=V.92) and quick connect is enabled
(+PSS=0)
ERROR otherwise
Report Commands: -QCPS? Reports selected value.
-QCPS=? Reports supported range of parameter values.
2.4 Caller ID Commands
Command: +VCID= n Caller ID Selection
Values: n = 0, 1, or 2
Default: 0
Description: Enables Caller ID detection and configures the reporting and
presentation of the Caller ID data that is detected after the first ring.
The reported data includes the date and time of the call, the caller’s
name and number, and a message. Set S0=2.
+VCID=0
Disables Caller ID.
+VCID=1 Enables Caller ID with formatted data.
+VCID=2 Enables Caller ID with unformatted data.
+VCID=? Displays the allowed values.
+VCID? Displays the current values.
Command: +VRID= Caller ID Report Retrieved
Values: 0, 1
Default: 0
Description: This command reports the data associated with the Caller ID services in
the incoming Call Line ID (ICLID) data format for the last received
call.
+VRID=0
Reports Caller ID with formatted presentation to the
DTE. Data includes date, time, name, and telephone
number.
+VRID=1 Reports Caller ID with unformatted presentation to the
DTE.
+VRID=? Displays the supported range of parameter values.
+VRID Displays Caller ID information of the last call received.