42
PURE NETWORKING RS-232/422/485 TO TWISTED-PAIR DEVICE SERVER
[Argument List]
idle…Set the serial port’s idle time.
type…Set the operation type (AUTO, SERVER, or CLIENT).
remote…Set the remote IP address.
port…Set the TCP port number.
baud…Set the serial port’s baud rate.
parity…Set the serial port’s parity.
length…Set the serial port’s word length.
stopbits…Set the serial port’s stop bits.
flow…Set the serial port’s flow control type.
statistics…Clear statistics.
show:
Type
show
to view a complete view commands list.
upgrade:
Reloads the configuration file or upgrades runtime firmware.
upgrade config:
Use this command to reload previously saved configurations. For
this operation to be successful, type in the IP address and filename accurately.
upgrade firmware:
Use this command to load new software versions for this
console. For example:
upgrade firmware xxx.xxx.xxx.xxx
Soft2.bin
CAUTION
After each configuration session, set DIP-switch 1 to the Off position.
Otherwise, the server will not transmit data.
Summary of Contents for LS4103A
Page 3: ......
