23
CHAPTER 5: Configuration
5. Type
admin
(the default username) at the username prompt, but leave the
password field blank since there’s no default value. Press the
Enter
key to
proceed. The Select User Interface screen (Figure 5-3) appears.
Figure 5-3. Select User Interface screen.
6. To select the command-line interface, type
1
. To choose the menu-driven
interface, type
2
. Or, use the
Tab
key to select
1
or
2
, then press the
Enter
key.
7. If you pressed
1
, the following prompt will appear.
Converter>
NOTE
At this prompt, you can type in command line interface commands.
However, we do not recommend using the command-line interface
option since the required commands are not documented in this
manual. Instead, use the menu-driven interface option.
If you pressed
2
(the menu-driven interface), the screen shown in Figure 5-4
appears.
5.1.2 M
AIN
M
ENU
C
ONFIGURATION
O
PTIONS
Figure 5-4 shows the Main Menu screen for the menu-driven configuration option.
From this screen, the configuration options available enable you to quickly access
and adjust the server settings as required. For descriptions, see
Sections 5.1.3–5.1.9
.
<1> CLI User Interface
<2> Menu-Driven Interface
_
Summary of Contents for LS4103A
Page 3: ......