Black Box LRA 2900 Reference Manual Download Page 92

Page: 92 / 280

Dial In Modify window

Model LRA2900A RAS Administrators’ Reference Guide

7 • Dial In

Modify Modem Configuration

This portion of the Dial In Modify window (see figure 26) describes modifying modem configuration access
server parameters for dial in users.

Figure 26. Dial In Modify window (modify Modem Configuration objects)

V34 (diModemV34Enable)

Allow V.34, K56 Flex, and V.90 options up to 56 kbps. The following options are available:

•

disable(0)—None of the options are enabled

•

v34Only(1)—Support V.34 operation only

•

v34andK56(2)—Support V.34 and K56 Flex operation only

•

v34andV90(3)—Support V.34 and V.90 operation only

•

v34 and k56 and v90(4)—Support V.34, K56 Flex, and V.90 operation

V32 (diModemV32Enable)

Allow V.32 and V.32bis modulations up to 14.4 kbps. The following options are available:

•

disable(0)—Neither option is enabled

•

enable(1)—Support V.32 and V.32bis modulations

V22 (diModemV22Enable)

Allow V.22 or Bell 212 modulations. The following options are available:

•

disable(0)—Neither option is enabled

•

enableV22(1)—Enable V.22 modulation

Summary of Contents for LRA 2900
























































































































































































































































































Search results

Summary of Contents for LRA 2900

Reviews:

Related manuals for LRA 2900

Brands by name

Popular brands

Black Box LRA 2900, Reference Manual

Search results

Summary of Contents for LRA 2900

Reviews:

Related manuals for LRA 2900

Brands by name

Popular brands