Black Box LRA 2900 Reference Manual Download Page 77

Page: 77 / 280

7 • Dial In

Model LRA2900A RAS Administrators’ Reference Guide

Dial Modulations window

•

Authenticating—The access server is in the process of verifying the user’s password by using static or
RADIUS authentication.

•

Online—The access server has completed authentication and the user is now able to access the Internet.

•

12tpTunneled—Subsequent multilink call that was answered by another access server and tunneled to the
access server that has the originating call.

•

Kill—The administrator can manually disconnect the user by activating this parameter.

•

Dead—The user’s call has been disconnected. This message disappears when the linger time expires.

•

Bury—The call has been killed and removed from the dial-in main window.

DSP Link (diactDSPIndex)

The physical DSP chip that the user’s call is on. This is a number from 0 to 59.

Connection Modulation (diactModulation)

The modulation type of the modem link (for example, V.34). The modem link can have these modulation or
data types:

•

unknown(0)

•

v21(1)—V.21 modulation

•

v22(2)—V.22 modulation

•

v32(3)—V.32 modulation

•

v34(4)—V.34 modulation

•

k56(5)—K56 Flex modulation

•

x2(6)—X.2 modulation

•

v90(7)—V.90 modulation

•

v110(8)—V.110 modulation (not currently implemented)

•

isdn64(9)—ISDN 64 modulation

•

isdn56(10)—ISDN 56 modulation (not currently implemented)

•

12tp(11)—12tp tunnelled multilink call

•

phase2(20)—Phase 2, an advanced state of modulation in v34 and higher

•

answerack(21)—acknowledgement phase of modulation

Transmit Connection Speed (diactTxSpeed)

The connected speed of the modem link (for example, 28.8 bps). These values, in bits per second, range from
300–33,600.

Summary of Contents for LRA 2900
























































































































































































































































































Search results

Summary of Contents for LRA 2900

Reviews:

Related manuals for LRA 2900

Brands by name

Popular brands

Black Box LRA 2900, Reference Manual

Search results

Summary of Contents for LRA 2900

Reviews:

Related manuals for LRA 2900

Brands by name

Popular brands