manualshive.com logo in svg

Black Box LRA 2900, Reference Manual

The Black Box LRA 2900 Reference Manual is a comprehensive and user-friendly guide for maximizing the potential of your device. Available for free download on our website, this manual equips you with all the necessary information to effortlessly operate and troubleshoot your product.

Share
Download
background image

The Statistics section

56

Model LRA2900A RAS Administrators’ Reference Guide 

5 • Authentication

2. Select 

Modify

 to set up or change access server Authentication parameters.

The Statistics section

The Statistics section of the main 

Authentication

 screen lists running totals of statistics for RADIUS and Static 

User logins gathered since the last access server reset.

Validated authentications (auAuthenticationsValidTotal)

The total number of validated authentications since the last access server reset.

Validated via primary server (auAuthenticationsValidPrimary)

The number of authentications validated by the primary RADIUS authentication server since the last access 
server reset.

Validated via secondary server (auAuthenticationsValidSecondary)

The number of authentications validated by the secondary RADIUS authentication server since the last access 
server reset.

Validated via static database (auAuthenticationsValidStatic)

The number of authentications validated by the Static User database since the last access server reset.

Denied authentications (auAuthenticationsDenied)

The total number of authentication attempts requested but denied since the last access server reset.

Primary server retries (auPrimaryServerRetrys)

The number of times the access server needed to make subsequent requests for a call to the primary RADIUS 
authentication server.

Secondary server retries (auSecondaryServerRetrys)

The number of times the access server needed to make subsequent requests for a call to the secondary RADIUS 
authentication server.

Accounting server retries (auAccountingServerRetrys)

The number of times the access server needed to make subsequent accounting requests for a call.

Primary server timeouts (auPrimaryServerTimeouts)

The total number of authentication timeouts by the primary RADIUS authentication server. 

Secondary server timeouts (auSecondaryServerTimeouts)

The total number of authentication timeouts by the secondary RADIUS authentication server. 

Accounting server timeouts (auAccountingServerTimeouts) 

The total number of accounting timeouts by the primary RADIUS accounting server. 

Maximum Response Time 

The maximum time it has taken for authentication to be completed since the server rebooted.

Summary of Contents for LRA 2900

























































































































































































































































































Reviews:

No comments

Related manuals for LRA 2900

Basalte CORE PLUS Installation Manual preview
CORE PLUS
Brand: Basalte Pages: 2
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
Linksys NSLU2 - Network Storage Link NAS Server Quick Installation Manual preview
NSLU2 - Network Storage Link NAS Server
Brand: Linksys Pages: 64
Patton electronics 29XX Series Administrator'S Reference Manual preview
29XX Series
Brand: Patton electronics Pages: 326
IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Brand: IEI Technology Pages: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Brand: IBM Pages: 32
Buffalo HD-H0.6TGL User Manual preview
HD-H0.6TGL
Brand: Buffalo Pages: 80
D-Link DVS-104 User Manual preview
DVS-104
Brand: D-Link Pages: 113
D-Link DVS-301 User Manual preview
DVS-301
Brand: D-Link Pages: 100
2Wire ML.016 MiLo Quick Start preview
ML.016 MiLo
Brand: 2Wire Pages: 2
HP ProLiant Moonshot Specification preview
ProLiant Moonshot
Brand: HP Pages: 21
ANTAIRA STE-501C User Manual preview
STE-501C
Brand: ANTAIRA Pages: 51
F5 FirePass Administrator'S Manual preview
FirePass
Brand: F5 Pages: 182
XtendLan TC-401L User Manual preview
TC-401L
Brand: XtendLan Pages: 38
OSD Audio BLACK SRT4 User Manual preview
BLACK SRT4
Brand: OSD Audio Pages: 4
Compatible Systems IntraPort A00-1869 Installation Manual preview
IntraPort A00-1869
Brand: Compatible Systems Pages: 44
TriLink AirProjector KJ-200 User Manual preview
AirProjector KJ-200
Brand: TriLink Pages: 56
Gigabyte G221-Z30 User Manual preview
G221-Z30
Brand: Gigabyte Pages: 143

Brands by name

Popular brands

Load more brands