manualshive.com logo in svg

Black Box LRA 2900, Reference Manual

The Black Box LRA 2900 Reference Manual is a comprehensive and user-friendly guide for maximizing the potential of your device. Available for free download on our website, this manual equips you with all the necessary information to effortlessly operate and troubleshoot your product.

Share
Download
background image

 

14

 

Model LRA2900A RAS Administrators’ Reference Guide 

 

Contents 

 

Passed to Link (dractPassLinkIndex)  .............................................................................................................128
Passed to Channel (dractPassChannel)  ..........................................................................................................128
Number Dialed (dractNumberDialed) ..........................................................................................................128
Calling Number (dractCallingPhone)  ...........................................................................................................128
Session Time (dractSessionTime) ..................................................................................................................128
Remaining Time (dractRemainingSession)  ...................................................................................................128
State (dractState) ...........................................................................................................................................128

How Drop and Insert works ................................................................................................................................128

Using Drop and Insert  ..................................................................................................................................129

 

10 Digital Signal Processing (DSP).................................................................................................................. 130

 

Introduction ........................................................................................................................................................131
DSP Settings main window .................................................................................................................................132

DSPs Available (dspAvailable) .......................................................................................................................132
Detected (dspDetected)  ................................................................................................................................132
HW Failures (dspFailed) ...............................................................................................................................132
Calls without an available DSP (dspDspNotAvailable) ..................................................................................132
DSP Index (dspIndex) ...................................................................................................................................132
Admin Desire (dspDesiredState)  ...................................................................................................................133
Instance #1 State (dspStatefirst)  ....................................................................................................................133
Instance #1 Use (dspUsefirst) ........................................................................................................................133
Instance #2 State (dspStateSecond)  ...............................................................................................................133
Instance #2 Use (dspUseSecond) ...................................................................................................................133
DSP Memory Capture  ..................................................................................................................................134
DSP PCM Capture .......................................................................................................................................134

DSP Connection Performance.............................................................................................................................134

Failure to Negotiate (dspFailurePercent)  .......................................................................................................135
Connection Summaries .................................................................................................................................135

Originating Calls (dspTotalOriginatingCalls)  .........................................................................................135
Answering Calls (dspTotalAnsweringCalls)  .............................................................................................135
Successful Connects (dspTotalSuccessfulConnects) .................................................................................135
Failed Connect PreV8 (dspTotalFailedConnectPreV8)  ...........................................................................135
Failed Connect PostV8 (dspTotalFailedConnectPostV8)  ........................................................................136
Remote Retrains (dspTotalRemoteRetrains) ............................................................................................136
Remote Renegotiates (dspTotalRemoteRenegotiates)  ..............................................................................136
Local Retrains (dspTotalLocalRetrains)  ...................................................................................................136
Local Renegotiates (dspTotalLocalRenegotiates)  .....................................................................................136
Suspect—A) Transitions into suspect state (dspTotalWentSuspect)  ........................................................136
Suspect—B) Recoveries from suspect state (dspTotalSavedFromSuspect) ................................................136
Reboot—A) Reboots due to consecutive fails (dspTotalRebootDueToFails)  ...........................................136
Reboot—B) Reboots due to error detection (dspTotalRebootDueToError)  ............................................136

DSP Connection Totals  ................................................................................................................................136

DSP Index (dspIndex) .............................................................................................................................137
Connects—Good (dspSuccessfulConnects)  .............................................................................................137

Summary of Contents for LRA 2900

























































































































































































































































































Reviews:

No comments

Related manuals for LRA 2900

ioCorp ADAPTIO 5760e User Manual preview
ADAPTIO 5760e
Brand: ioCorp Pages: 18
Intel SRPM8 Quick Start Manual preview
SRPM8
Brand: Intel Pages: 32
Tangent Thin Client 166 Datasheet preview
Thin Client 166
Brand: Tangent Pages: 2
Kraun Video Server User Manual preview
Video Server
Brand: Kraun Pages: 36
Supermicro SUPERSERVER 5028TK-HTR User Manual preview
SUPERSERVER 5028TK-HTR
Brand: Supermicro Pages: 138
Sony XDAAI1PK Brochure preview
XDAAI1PK
Brand: Sony Pages: 8
Sony BSV-M1 - StorStation NAS Server Operating Instructions Manual preview
BSV-M1 - StorStation NAS Server
Brand: Sony Pages: 58
Polycom RSS 2000 V1.0 Getting Started Manual preview
RSS 2000 V1.0
Brand: Polycom Pages: 11
MPI Technologies LAN Brick Eth 10 Specification Sheet preview
LAN Brick Eth 10
Brand: MPI Technologies Pages: 2
MSI MS-96E3 User Manual preview
MS-96E3
Brand: MSI Pages: 54
MSI MS-9249 User Manual preview
MS-9249
Brand: MSI Pages: 86
San Telequip SC10E16A1 Series User Manual preview
SC10E16A1 Series
Brand: San Telequip Pages: 85
VisionxIP VxIP 7111 User Manual preview
VxIP 7111
Brand: VisionxIP Pages: 77
Red Hat DIRECTORY SERVER 7.1 SP7 - S Release Note preview
DIRECTORY SERVER 7.1 SP7 - S
Brand: Red Hat Pages: 12
ClearView Venue Player System Manual preview
Venue Player
Brand: ClearView Pages: 42
Planet FPS-1012N Quick Installation Manual preview
FPS-1012N
Brand: Planet Pages: 28
Lanberg WF01 64 V2 Series User Manual preview
WF01 64 V2 Series
Brand: Lanberg Pages: 22
QNAP GM-1000 User Manual preview
GM-1000
Brand: QNAP Pages: 53

Brands by name

Popular brands

Load more brands