_____________________________________________________________________
724-746-5500 | b lackb o x.co m
Page 170
To configure a username and password when accessing this port with Username = user1 and Password =
secret:
# config -s config.ports.port#.sdt.username=user1
# config -s config.ports.port#.sdt.password=secret
Terminal server mode
Enable a TTY login for a local terminal attached to serial port 5:
# config -s config.ports.port5.mode=terminal
# config -s config.ports.port5.terminal=[vt220 | vt102 | vt100 | linux | ansi]
The default terminal is vt220.
Serial bridge mode
Create a network connection to a remote serial port via RFC-2217 on port 5:
# config -s config.ports.port5.mode=bridge
Optional configurations for the network address of RFC-2217 server of 192.168.3.3 and TCP port used by
the RFC-2217 service = 2500:
# config -s config.ports.port5.bridge.address=192.168.3.3
# config -s config.ports.port5.bridge.port=2500
To enable RFC-2217 access:
# config -s config.ports.port5.bridge.rfc2217=on
To redirect the serial bridge over an SSH tunnel to the server:
# config -s
config.ports.port5.bridge.ssh.enabled=on
Syslog settings
Additionally, the global system log settings can be set for any specific port, in any mode:
# config -s config.ports.port#.syslog.facility='facility'
'facility'
can be:
Default
local 0-7
auth
authpriv
cron
daemon
ftp
kern
lpr
news
user
uucp
# config -s config.ports.port#.syslog.priority='priority'
'priority'
can be:
Default
warning
notice
Info
error