_____________________________________________________________________
724-746-5500 | b lackb o x.co m
Page 104
UPS Power Status Alert
— This alert will be triggered when the UPS power status changes
between on line, on battery, and low battery. This status will only be monitored on the
Applicable UPS(es)
you select.
Environment and Power Alert
—(next section).
Alarm Sensor Alert
—(next section).
7.2.3 Configuring environment and power alert type
This alert type monitors UPSes, RPCs, power devices, and EMD environmental devices.
Select
Environment and Power Alert
to activate.
Specify which
Sensor Type
to alert on (Temperature, Humidity, Power Load and Battery Charge).
Set the levels at which
Critical
and/or
Warning
alerts are to be sent. You can also specify
High
and/or
Low
Set Points
for sending alerts and the
Hysteresis
to be applied before resetting off
the alerts.
Note
Specify the
Set Point
values are in Degrees Centigrade for Temperature, Amps (Current)
for Power Load, and % (Percentage) for both Humidity and Battery Charge.
