44
NTP:
NTP is Network Time Protocol and is used to sync the network time based
Greenwich Mean Time (GMT). If use the NTP mode and select a built-in NTP
time server or manually specify an user-defined NTP server as well as Time
Zone, the switch will sync the time in a short after pressing
<Apply>
button.
Though it synchronizes the time automatically, NTP does not update the time
periodically without user’s processing.
Time Zone is an offset time off GMT. You have to select the time zone first and
then perform time sync via NTP because the switch will combine this time zone
offset and updated NTP time to come out the local time, otherwise, you will not
able to get the correct time. The switch supports configurable time zone from –
12 to +13 step 1 hour.
Default Time zone: +8 Hrs.
Daylight Saving:
Daylight saving is adopted in some countries. If set, it will adjust the time lag or
in advance in unit of hours, according to the starting date and the ending date.
For example, if you set the day light saving to be 1 hour. When the time passes
over the starting time, the system time will be increased one hour after one
minute at the time since it passed over. And when the time passes over the
ending time, the system time will be decreased one hour after one minute at
the time since it passed over.
The switch supports valid configurable day light saving time is –5 ~ +5 step one
hour. The zero for this parameter means it need not have to adjust current time,
equivalent to in-act daylight saving. You don’t have to set the starting/ending
date as well. If you set daylight saving to be non-zero, you have to set the
starting/ending date as well; otherwise, the daylight saving function will not be
activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function Daylight Saving and
described in detail.
Day Light Saving Start :
This is used to set when to start performing the day light saving time.
Mth:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default:
1
Hour:
Range is 0 ~ 23.
Default:
0
Summary of Contents for L2 Plus
