background image

6

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 1: SPECIFICATIONS

Approvals

Regulatory testing:  
   FCC (Class B), CE (Class B), RoHS2 (CE);

Networking

Standards: 1000BASE-T* 
* Maximum speed is heavily dependant on network configuration, bandwidth  

and performance. 1000BASE-T is highly recommended for best performance. 

Data Traffic: Layer 2;
Control Traffic: Layer 3, customizable as unicast or broadcast

Distance

Direct connect: Up to 328 feet (100 m) over solid-core CAT5e/6/7 cable; 
Network connect: Up to 328 feet (100 m) over solid-core CAT5e/6/7 cable; 
(One local to seven remote pairings supported for Simultaneous Users Interaction.)

Maximum USB Devices Supported

Up to 30 devices

USB Device Support

High-speed devices (480 Mbps, USB 2.0); 

 

Full-speed devices (12 Mbps, USB 2.0 and 1.1); 

 

Low-speed devices (1.5 Mbps, USB 2.0 and 1.1)

Enclosure Material

Black anodized aluminum

Connectors

Local unit:  
   (1) USB Type B, (1) RJ-45; 
Remote unit:  
   (4) USB Type A, (1) RJ-45

Temperature Tolerance

Operating: 32 to 122° F (0 to 50° C); 
Storage: -4 to 158° F (-20 to 70° C)

Humidity Tolerance

Operating: 20 to 80% relative humidity, non-condensing;  
Storage: 10 to 90% relative humidity, non-condensing

Power

NOTE:  One power supply is included for remote unit. Local unit derives power  

from the USB interface.

Input: 100/240 VAC, 50–60 Hz; 
Output: 24 VDC, 1 A; 
AC adapter connector: 2.1-mm center positive jack 
Power available to USB device at remote unit:  
    Up to 2.4 A total among the ports, 600 mA at each USB port concurrently,  
    1 A max. per port when two or less being used; 
Power consumption:  
   Local unit: 200 mA maximum, 
   Remote unit: Up to 2.4 A total among the ports, 600 mA at each USB port concurrently,  
      but 1 A max. per port when two or less being used

Dimensions

Each unit: 3.9"H x 3"W x 1"D (9.9 x 7.6 x 2.5 cm)

Weight

Shipping: 2.2 lb. (1 kg) 

TABLE 1-1. SPECIFICATIONS

Summary of Contents for EMD100USB

























Reviews: