Black Box Auto-Sync ASTC3000 User Manual Download Page 72 | Manualshive

Page: 72 / 110

background image

Auto-Sync Time Clock

5-8

724-746-5500 | blackbox.com

NOTE: The transaction file will automatically be named auto-

sync_time_sync_report.html or .txt (see Figure 5-9). The transaction report
file created in either html or text format can be easily edited. Every time
you create a report file the previous report file will be overwritten. It is

recommended to move the report file to a different location if you do not
want that to happen.

5.2.3.

Advanced Function of Downloading to Auto-Sync Time Clocks

The downloading procedures assume you have read and understand the concepts
described in Chapter 4: Auto-Sync Time Clock Operation. These procedures also

assume that you have previously configured a clock and created a shared
“config.bin” for that clock. This must have been done first for you to have this file
to transfer to other clocks. A key feature of the Auto-Sync Utility is that it allows
you to perform the Update Configuration function on multiple clocks.
NOTE: Using the Restore function, from the clock Utilities (see Chapter 4) web

page will only allow you to download to the one clock that you are
connected to.

Connecting to Auto-Sync Time Clock(s) and downloading the configuration
information from a “ATVSConfig.bin” file can be accomplished via two methods;
“Auto Discovery” and “Manual Discovery”. Auto Discovery is used if you do not
know the clock(s) IP Address, while Manual Discovery would be used if you did

know the clock(s) IP address. If you should forget a clocks IP address, simply
reboot the clock by pressing the Reset button and the clock will flash its IP address
as it starts up.

Auto Discovery Procedure for download:
1.

Startup the Auto-Sync Utility. All of the discovered Auto-Sync Time Clocks will
automatically appear in a list with the Domain, Device Name, IP Address,
MAC Address, and Status. Select the desired Auto-Sync Time Clock(s) from
the list by clicking in the “Select” column (see Figure 5-11). Click “Select All
Clocks” to select/deselect all discovered clocks (this is the default).

2.

From the main menu click on View and select the Advanced options



Download submenus.

«
...
70
71
72
73
74
...
»

Summary of Contents for Auto-Sync ASTC3000















































































































Reviews:

No comments

Related manuals for Auto-Sync ASTC3000

RCDC1 - IPOD/IPHONE ALARM CLOCK

Brand: Panasonic Pages: 2

Brand: Naxa Pages: 12

Brand: Laser Pages: 8

Brand: Velleman Pages: 17

Brand: Hannlomax Pages: 4

Brand: Pike Pages: 9

Brand: Denver Pages: 49

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: philippi Pages: 6

Brand: La Crosse Technology Pages: 2

Brand: evertz Pages: 14

Brand: Skyworks Pages: 63

Brand: RCA Pages: 3

Brand: BEARWARE Pages: 30

Brand: BEARWARE Pages: 32

Brand: BASETech Pages: 4

Brand: Ambient Weather Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands