Black Box Auto-Sync ASTC3000 User Manual Download Page 75 | Manualshive

Page: 75 / 110

background image

Chapter 5:

Utility

724-746-5500 | blackbox.com

5-11

NOTE: It is recommended to perform a Backup from the built-in clock Backup

Utility before performing any clock firmware updates. FAILURE to do this
could result in loss of clock configuration and/or the transaction database!

NOTE: If updating clock firmware, click on the

button after browsing

to and selecting a clock firmware file. ONLY PERFORM this function if Black
Box recommended. When performing a firmware update, the file would
have an “image.bin” name and probably be stored in a different location.
Otherwise, this function is not normally used.

5.2.4.

Auto-Sync Time Clock Menu Selections

With the Auto-Sync Utility open, from the main menu use the buttons, and/or
perform the following functions, if necessary.

Menu Buttons



Start Auto-Sync Time Clock discovery – Use this

button (if active) to

restart (rerun) the auto discovery, and generate a new list.



End Auto-Sync Time Clock discovery – Use this

button (if active) to stop

the auto discovery.



Save Settings – Use this

button to save the settings you have defined on

the Settings tab for Domain Name and Clock Discovery Timeout. This
information will be saved in auto-sync_config.INI file.



Print clock information – Use this

to print to your default printer a list of

all discovered Auto-Sync Time Clocks with the IP address, MAC address and
name.

File Menu Functions



Refresh – Use this function for quick start/stop restart (rerun) the auto
discovery, and generate a new list.



Reset Status – Use this function to reset (refresh) the displayed status column

after performing an update. This command always resets the status to Ready,
Updated (configuration or firmware updated), and Failed (configuration or
firmware update failed).



Exit – Use this function to close the Auto-Sync Utility.

«
...
73
74
75
76
77
...
»

Summary of Contents for Auto-Sync ASTC3000















































































































Reviews:

No comments

Related manuals for Auto-Sync ASTC3000

Brand: La Crosse Technology Pages: 6

Brand: Hamilton Beach Pages: 10

Brand: Timex Pages: 24

Brand: AudioSonic Pages: 44

Brand: Manta Pages: 29

Brand: Jenile Pages: 14

Brand: Sylvania Pages: 6

Brand: Braun Pages: 5

Brand: ETT Pages: 24

Brand: RCA Pages: 4

Dream Machine ICF-C743

Brand: Sony Pages: 2

DREAM MACHINE ICF-C390

Brand: Sony Pages: 9

DREAM MACHINE ICF-C295

Brand: Sony Pages: 9

Dream Machine ICF-C290

Brand: Sony Pages: 13

Dream Machine ICF-C490

Brand: Sony Pages: 16

Dream Machine ICF-C411

Brand: Sony Pages: 20

Dream Machine ICF-C470L

Brand: Sony Pages: 22

Brand: Onaroo Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands