Black Box Auto-Sync ASTC3000 User Manual Download Page 9 | Manualshive

Page: 9 / 110

background image

Chapter 1:

Introduction

724-746-5500 | blackbox.com

1-5

1.3.

Auto-Sync Time Clock Installation & Operation Guide

The Auto-Sync Time Clock Installation & Operation Guide was designed to assist
you in the daily operation of your clock and to provide a comprehensive
understanding of the Auto-Sync Time Clock. This Guide can be found on the Auto-
Sync Utility CD that came with your clock.

1.4.

Time Servers General Information

A time server is a server computer that reads the actual time from a reference
clock and distributes this information to its clients using a computer network. The
time server may be a local network time server or an Internet time server.
The most important and widely-used protocol for distributing and synchronizing

time is the Network Time Protocol (NTP), though other less-popular or outdated
time protocols continue to be used.
The time reference used by a time server could be another time server on the
network or the Internet, a connected radio clock or an atomic clock. The most
common true time source is a GPS or GPS master clock. Time servers are
sometimes multi-purpose network servers, dedicated network servers, or dedicated

devices. All a dedicated time server does is provide accurate time.
An existing network server (e.g. a file server) can become a time server with
additional software. The NTP homepage provides a free and widely-used reference
implementation of the NTP server and client for many popular operating systems.
The other choice is a dedicated time server device.
The term "stratum" is used to label the closeness to a central or high quality time
server. The stratum indicates the place of a particular time server in a hierarchy of
servers. The scale is 0 to 16 where 0 is the most accurate and likely a highly
specialized physical hardware device. Some time clients will reject a time update
from a server whose stratum is too high, and most will prefer lower strata time

sources to higher ones. This can be a pitfall for administrators setting up an in-
house time server with no true time source.

«
...
7
8
9
10
11
...
»

Summary of Contents for Auto-Sync ASTC3000















































































































Reviews:

No comments

Related manuals for Auto-Sync ASTC3000

Brand: Basic XL Pages: 56

Brand: Zetronix Pages: 13

Brand: TMI Products Pages: 10

Brand: La Crosse Technology Pages: 14

Brand: Stanley Pages: 12

TM80 - Clock Radio / Digital Audio Player

Brand: Timex Pages: 14

Brand: Timex Pages: 17

Brand: Pure Digital Pages: 2

Brand: PURE Pages: 18

Brand: HORITA Pages: 15

Brand: hopf Pages: 52

Brand: Habitat Pages: 4

Brand: Techno Line Pages: 16

Brand: La Crosse Pages: 2

Brand: La Crosse Pages: 10

Brand: JVD Pages: 4

Brand: JVD Pages: 19

Brand: JVD Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands