71
APPENDIX B: Programming Worksheet
When you program the ASD-4, each time you press a key on your phone to
enter a programming tone, you have only six seconds to enter the next tone:
If you don’t enter the next tone within six seconds, the ASD-4 will exit the
programming mode without saving your changes. For this reason, we
recommend that you write down your programming changes so that you can
read them off when you enter them rather than trying to work from memory.
Refer to
Section 5.2
for each feature or function’s possible values.
Make copies of this appendix and compose your changes on them. Check
off, circle, or write in (as directed) each key sequence you will use. Then go
through and copy all of them onto the lines at the bottom of page 74.
ACCESS PROGRAMMING MODE
(circle one)
Locally: or
Remotely:
[#] [*]
[ ] [ ] [ ] [ ]
(write in your Security Access Code)
PROGRAM ENTRIES
(put a check mark on the line at left if you’re going
to program the given feature or function)
_______
[9] [9] [9] [*]
Reset to Factory Settings
(must precede any other change)
_______
[0] or [1]
[0] [*]
Automatic Ring Reduction
(circle one)
_______
[0] or [1]
[1] [*]
Open Line Notification
(circle one)
_______
[0] or [1]
[2] [*]
Extension Detection
(circle one)
Appendix B: Programming Worksheet
Summary of Contents for ASD-4
Page 83: ...NOTES ...
