REMOTE VIDEO SYSTEM IP
36
The Terminal Summary section displays the current terminal emulator settings (terminal emulator, host
connection, keyboard connection, and display size for the Remote Video System IP. These settings are
described in
Section 4.3.4
.
The Remote Access (VNC) Summary displays the current remote-access settings for the Remote Video System
IP (VNC connection and Connect to VNC server), using the Virtual Network Computing (VNC) protocol.
These settings are described in
Section 4.3.5
.
The System Summary section lists the device’s model, IP address, MAC address, screen resolution, description,
contact, and location.
Applying and Saving Changes
The Web user interface runs locally on the device, which means that the interface always maintains and displays
the latest settings in the Remote Video System IP.
On each page, press the
Apply
button to save any configuration settings changes to the Remote Video System
IP.
Canceling Changes
To cancel changes you made, click the
Refresh
or
Reload
button on the Web browser. This will cause the
browser to reload the page. Any changes made since the last time you clicked the
Apply
button are reset.
Online Help
Online help is available for all Web user interface screens, and for common configuration and administration
tasks. If you are new to device configuration, you might also want to review the tutorial that is available on the
Home page. (To get to this page, follow the instructions in
Section 4.3.2.
)
4.3.3 C
HANGE THE
IP A
DDRESS
Normally, IP addresses are assigned to RVS devices either through DHCP or the RVS Device Setup Wizard. If
you are unable to assign IP addresses through either of these methods, you must assign an IP address to the
Remote Video System IP using either the Web user interface or the command-line interface.
Changing an IP Address from a Web Browser
Prerequisite
The RVS device already has an IP address and you simply want to change it.
Procedure
1. Open a Web browser and type in the Remote Video System IP’s current IP address in the URL address bar.
2. If security is enabled for the Remote Video System IP, a login prompt displays. Type in the user name and
password for the device. If you do not know the user name and password, contact the system administrator
who initially set up the device.
3. Click
Network
to access the Network Configuration page. See
Section 4.3.7
.
4. On the IP Settings page, select
Use the following IP settings
. See
Section 4.2.2
.
Summary of Contents for AC1059A
Page 3: ......
