See ‘Tools-Electric’
– Yellow Pages –
for Service & Sales
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Fan cover or vac tube not installed.
• Install fan cover for blow mode or
vac tube for vac mode.
• Cord not plugged in.
• Plug tool into a working outlet.
• Circuit fuse is blown.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
• Circuit breaker is tripped.
• Reset circuit breaker.
(If the product repeatedly causes
the circuit breaker to trip,
discontinue use immediately and
have it serviced at a Black & Decker
service center or authorized
servicer.)
• Cord or switch is damaged.
• Have cord or switch replaced at
Black & Decker Service Center or
Authorized Servicer.
• Unit jammed or clogged.
• Debris blocking inlet/outlet or fan.
• Unplug power cord. Remove vac
tube. Refer to “Cleaning and
Storage Section - Maintenance”.
For assistance with your product, visit our website
www.blackanddecker.com
for the location of the service center nearest you or call the
BLACK & DECKER help line at
1-800-544-6986.
Important
To assure product
SAFETY
and
RELIABILITY
; repairs, maintenance and adjustments (other than those listed in this manual) should be
performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether
you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service
location, refer to the yellow page directory under "Tools—Electric" or call:
1-800-544-6986 or visit www.blackanddecker.com
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be
replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a
participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale).
Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for
exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at
our option. Proof of purchase may be required.Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to
state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product
is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT
: If your warning labels become illegible or are missing, call
1-800-544-6986
for a free replacement.
8
