7 - ENG
A. Inspect cord before using. Do not
use if cord is damaged.
B. Keep all connections dry and off
the ground.
C. Do not touch plug with wet hands.
D. The pressure washer is provided
with a ground fault circuit interrupter
built into the power plug.
If replacement of the plug or cord is
needed, use only identical replacement
parts. Contact customer service for
proper replacement parts.
WARNING:
Test GFCI before each
use. DO NOT use pressure washer if
test below fails.
GFCI Test Procedures:
1. Plug GFCI into power receptacle.
Indicator light should illuminate.
2. Press test button (Z). Light should
turn off.
3. Press reset button (X) for use.
Indicator light should illuminate.
x
Z
1
Do not use if above test fails.
NOTE:
The GFCI must be reset each
time the pressure washer is connected
to an electrical outlet. Reset by simply
pushing the reset button on the GFCI
power plug.
ExTENSION CORDS
Use only extension cords that are
intended for outdoor use. These
extension cords are identified by a
marking “Acceptable for use with
outdoor appliances: store indoors
while not in use”. Use only extension
cords having an electrical rating not
less than the rating of the product.
Do not use damaged extension cords.
Examine extension cord before using
and replace if damaged. Do not abuse
extension cord and do not yank on any
cord to disconnect.
Keep cord away from heat and
sharp edges. Always disconnect the
extension cord from the receptacle
before disconnecting the product from
the extension cord.
When using an extension cord, observe
the specification below:
Cable Length
Wire Gauge
Up to 25 ft.
(7.5 m)
12 AWG Outdoor
WARNING:
To reduce the risk of
electrocution, keep all connections dry
and off the ground. Do not touch plug
with wet hands.
Save theSe
inStructionS
