10- ENG
Leaks caused by loose fittings or
worn or damaged hoses can result
in injection injuries. DO NOT TREAT
FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
PRESSURE WASHER
OPERATING FEATURES
CLICk-N-CLEAN
®
SPRAY LANCE
(Fig. 4)
WARNING:
Do not move the nozzle
to adjust spray while the trigger is
squeezed.
The Click-N-Clean
®
4 n 1 nozzle has
four spray settings. Turn the collar 90°
to the desired position.
S.
The
Low Pressure
Soap
position is
intended for dispen-
sing detergent.
T.
The
High Pressure jet
Stream
position is
intended for cleaning
with high pressure.
U.
The
High Pressure
Wide
Fan
Spray
position is intended for
clea ning with high
pressure.
V.
The
High Pressure
Turbo Spray
position
is intended for optimal
cleaning.
NOTE:
The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
S
U
V
T
4
NOTE:
The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
CAUTION:
The
High Pressure
jet Stream
spray position is very
aggressive. We recommend that for
most cleaning applications a fan spray
pattern (U or V) be used to avoid
damage to the surface being sprayed.
POWERSWIVEL
®
FAN SPRAY WAND
(FIG. 5)
CAUTION:
The red nozzle portion of
the lance pivots 360°. This adjustment
can only be made when the gun trigger
is completely released. Do not attempt
to adjust the nozzle when the machine
is in operation. Failure to follow this
instruction could result in personal
injury.
The nozzle pivots 360° and delivers a
high pressure fan spray pattern to clean
hard to reach areas.
R
5
USING DETERGENT (FIG. 6–7)
NOTICE:
Use only approved pressure
washer cleaners. Do not use bleach,
chlorine, or any cleaners containing
acids.
NOTICE :
Fill and flush the detergent
tank with clear water after use.
1. Insert the spray lance (B) into the
gun (A) by pushing firmly and
simultaneously twisting a 1/4 of a
turn counterclockwise until locked
into place.
