bk ultrasound Flex Focus 1202, User Manual

Page: 51 / 66

Flex Focus 1202 User Guide (BB1756-Q) Battery Support 51
Figure 4-5. Low battery message.
The low-battery message informs you that the battery level is low and that the system
will shut down when the system monitor clock matches the time stamp in the
message (shown here as 13:18:58).
The display on the battery box begins to blink regularly when the low battery
threshold is met, and it continues to blink even after the critical low battery threshold
is met and the system has shut down.
To set the level for the low battery message, see Flex Focus Advanced User Guide .
Critical Low Battery
The setting for critical low battery is set to 3 minutes by default. When the battery
reaches the critical level, the system shuts down immediately.
To set the level for the critical low battery message, see Flex Focus Advanced User
Guide .
AC power
LED
When the system is plugged in, the display on the battery box is lit and the AC Power
indicator light (normally hidden by the door on the battery pack) is lit. See Fig 4-4.
Power Save Mode
Power save
mode
With power save mode, you can conserve battery power and reduce energy
consumption when the system is not in active use. A message appears on the monitor
to notify you when the system is about to go into power save mode.
Figure 4-6. Power save message.
To exit power save mode and restore the system to normal power, you can do one of
the following:
•
Press a key on the keyboard
•
Press the transducer button
•
Move the trackball
To enable and configure power save mode, see Flex Focus Advanced User Guide .