bk ultrasound Flex Focus 1202, User Manual

Page: 20 / 66

20 Chapter 2 December 2015 Flex Focus 1202 User Guide (BB1756-Q)
Connectors
PC connectors for connecting the system to other equipment such as approved
printers and video equipment are located in the neck of the system. To access them,
unscrew the screw on the bottom of the neck and remove the connector cover. See
Fig 2-2.
Figure 2-2. Flex Focus connector cover.
Some connectors are used by the system. Do not use connectors that are not labelled
in Fig 2-3. For systems with a battery pack, the external power is plugged directly
into the battery pack on the system stand. The system is then connected to the power
source through a connection from the battery pack to the 12 V plug in the neck (see
“Systems with battery pack” in Fig 2-3). Systems with a battery pack are delivered
with a power cord in the neck; this is an auxiliary power source for an approved
printer. When there is no printer on the system, the plug on the auxiliary power cord
is stored in the empty space next to the 12 V outlet in the neck.
More information about the connectors is in Table 2-2. Information about the cables
to use is in Table 2-5.
Connector cover
Unscrew here to remove
connector cover