40
•
Partial : only a part of the memory is displayed; the screen is frozen; only the bargraph and the filling rate show the
status of data acquisition; you have access to time cursors and zooms.
You cannot visualize a block else than the current one, draw a plot or save the data acquisition into a file as long
as the current data acquisition is not finished.
7.7 Memory output
You can access the « memory output » mode by pressing
Display of the data acquisitions available in the internal memory or in files. Possibility to start the paper printing of the
data acquisitions.
Figure 7.5
1. Read blocks or file: selection of the memory block or of the file to display; if there is no valid block, the only menu
key available will be « Load file »
2. Screen setup: type of display, diagrams; see chapter Use
3. Time cursors: vertical cursors, zoom
4. Voltage cursors: horizontal cursors
5. Zoom between cursors: allows a zoom between the positioned cursors
6. Zoom + & Zoom -: allow zooming or not onto a part of the data acquisition
7. Plotting setup: configuration of the data acquisition drawing; « Launch plot » key
8. Total display of the data acquisition
9. Validation of the buffered channels to display 10- Cursor for scrolling along the data acquisition.
The upper window displays:
•
the number of the displayed block
•
the sampling rate of the block
www.
GlobalTestSupply
.com
Find Quality Products Online at:
