30
Name of the files
: the name of each file is made of 12 characters plus one 4-cipher number. The device will automatically
increase this number at each record.
Only the validated channels (i.e. in
ON
position; see chapter
Use
) will be recorded into the file.
Before writing into the file, a pop-up reminds you the saved channels and the number of points per channel.
The file is made of:
•
a header, including the information later required to recover the file (the setup of each channel, the sampling rate,
etc.).
•
the N samples (1 sample = 2 bytes per channel).
4 Recovery of the data acquisition files
Press
from the main menu, then
.
The following window pops up:
Select
. The following window pops up:
Select the place and the name of the file to load and display on screen, then press
Operating software
Data acquisition files may be transferred to a PC computer.
The SeframViewer software is provided on a CD-ROM with the device. It makes it possible to display the recorded files
or convert them as xls or txt files.
It works under WINDOWS XP, 2000, Vista, Seven, 8 with Framework 2.0
Transfer of files from the recorder to the PC:
o USB peripheral o Thanks to the FTP protocol.
5 Transfer via FTP
•
Using SeframPilot:
The ftp transfer is made directly by SeframPilot: if the IP address is for DAS60, validate with
•
Using Windows Explorer:
www.
GlobalTestSupply
.com
Find Quality Products Online at:
