28
FILE MANAGEMENT
General
For all possible files, the device has an internal flash disk available and may accept an USB stick, which makes it possible:
•
to save and load the total configuration of the recorder
•
to save or restore a data acquisition.
The names of the setup files have a “cnf” ex-voltage.
The names of the data acquisition files have a “rec” ex-voltage.
You can create directories and save the files into them.
HD / USB stick
: read/write into the internal flash disk or an USB stick (if it was connected at the start of the
device)
Copy of a file to USB
: copy the selected file or directory to an USB peripheral
Type the name of a new file
Create directory
: creation of a new directory; you can type its name with the alphanumerical keyboard displayed
on screen
Erase
erases the selected directory or file
Close the window
Directory Selection
: Allows you to select the directory to work with
8- Selection of the file window
: Allows you
to select the file to work with
It is highly advisable to work in a directory and not at the root of the flash disk When erasing a directory, all files
in this directory will be erased too.
Management of the configuration files
The configuration file management page is linked to the
key.
There name bear the
"cnf"
exvoltage.
Reset
: sets up the device in standard configuration
www.
GlobalTestSupply
.com
Find Quality Products Online at:
