33
Direct Mode
This chapter describes the
Direct mode
of the recorder, designed to print out the measurements made on the channels
in real time on heat-sensitive paper.
This mode does not exist on models without integrated printer.
You can start and stop the print out under various conditions.
You can activate a simultaneous save of the measurements on file.
6.1 Launching the printing
Press
.
Programming the start and stop conditions of the print.
Selection of the actions after print and validation of the save in real time.
Figure 6.1
•
F(t): printing a graph as a function of time
•
Digital: printing digital values of the measurements as a table
2.
Paper speed:
printing speed
You can change it from 10mm/min to 20mm/h.
2. Print configuration: see chapter 4.2
3. Start: start condition of the print
−
Manual: with the
key
−
Trigger: with a channel, with a combination of analog and logic channels (see chapter 5)
−
Stand-by: after a delay or at a precise date and time
www.
GlobalTestSupply
.com
Find Quality Products Online at:
