13
2.5 Thermal Printer
The DAS30, 50 and 60 recorders may be ordered with a thermal printer. The printer prints to 110mm wide thermal
paper. Paper must always be loaded in the printer to avoid printing without paper and risking damage to the thermal
print heads.
2.5.1 Loading Paper
•
Lay the device on the right side
•
Press the black button to open the door to the printer
•
Install the paper into the receptacle ("no de ref" must be on the side of the plugs) and insert the paper through the
slot in the door.
•
Close the lid securely
Note:
If the printer outputs paper and the paper is blank, it is possible that the paper is loaded upside down.
Note:
Only one face of the paper is heat-sensitive. Reversing the paper at loading will result in the absence of any
printing out.
2.5.2 Storing Printed Recordings
In order to maintain the quality of the paper recordings, the following is recommended:
•
Avoid using laminated sleeves
•
Store away from light, in a dry and cool place.
•
Store in a carboard sleeve
2.6 Power-up Configuration
At power-up, the recorder will be configured how it was when it was shut down. If it becomes inconsistent, the recorder
may need to be repaired. Contact B&K Precision for service information.
A default setup can be loaded from the “Setup Screen”.
2.7 Routine Maintenance
Maintenance simply consists of cleaning the outside the device. The recorder should be periodically cleaned.
•
Use water and soap to clean the metal surfaces
•
never use any product that contains petroleum products, benzine, or alcohol. These may damage screen printed
details.
•
Wipe all surfaces with a soft lint-free cloth
•
Use some antistatic screen cleaner for the touchscreen
www.
GlobalTestSupply
.com
Find Quality Products Online at:
