Harmonic Measurement Function
34
Figure 6.2
Bar Graph Data
6.2 List Mode
Enter this mode by pressing the
button (if not in the harmonic mode already), then select “LIST” from the on-
screen soft-keys. This list is used for showing the voltage, current, active power, reactive power, phase and total harmonic
distortion (THD) factor of different harmonics. Harmonic lists can be displayed as a complete, odd, or even set. See
. From the “SETUP” menu, the list of harmonics is defined. The 1
st
through the 50
th
, odd, even, or all
harmonics to display is configured here.
Figure 6.3
List mode - Harmonics
The list is composed 4 pages. Navigate to each page using the right and left arrow keys. The table columns are listed
in
6.3 Setup Menu
The setup menu allows the user to set the distortion factor calculation formula, PLL source, and set of harmonics to
analyse and display. From the Harmonic Measurement function,
, press the “MENU” soft-key,
.
