BK Precision 5335B, User Manual

Page: 15 / 52

Menu 15
Figure 2.4 COMM Configuration - USB
2.4.3 GPIB
The GPIB interface may be configured to addresses 1 through 30. Use the arrow keys to select the numeric field beside
“GPIB Address” and use the rotary knob to change the value. The user may select each digit by the arrow keys as well.
Figure 2.5
Figure 2.5 COMM Configuration - GPIB
2.4.4 LAN
The LAN (Ethernet) interface may be configured as either DHCP or static. Use the arrow keys to select the IP Mode
field. When DHCP is selected, the current IP, subnet, and gateway are shown on screen ( Figure 2.6 ). When “MANU”
is selected (static mode) ( Figure 2.7 ), the screen shows fields for setting the IP, subnet, and gateway. Using the arrow
keys and the rotary knob allows the user to move between fields and digits, and use the rotary knob to change the value.
2.5 System Configuration Menu
From this menu, setting the date, time, brightness, and the state of the beep function is set. Use the arrow keys to
navigate the fields, and the rotary knob to change the value. For the beep function, the soft keys are used to change the
value. When settings are changed, press the key to commit the changes. See Figure 2.8 .