Meter Display
The 5335B has 3 configurable display formats. Each format also allows for 5 different configured sets of measurement.
1 large and 6 small, 4 large and 6 small, or 12 small measurements may be displayed. See
.
4.1 Operation steps
1. Press
2. The “View” soft-keys select the display format (1,4,12). Repeated press of the soft-key cycles through the different
configurations, up to 5 of them.
3. The “CONFIG” soft-key enters the configuration mode for that set of pages.
4. The “FUNC” soft-key cycles through the sets of measurements available for Power (P), Current (I), and Voltage (U).
5. To change the measurements shown on a page, use the arrow keys and move the cursor to an on-screen parameter,
and select the desired measurement from the soft-keys on the right of the display.
6. To add or remove a page press the “INSERT PAGE” or “DELETE PAGE” respectively. 1 to 5 pages are supported.
Figure 4.1
1 main measurement
