BK Precision 5335B, User Manual

Page: 13 / 52

Menu
Configuration of system-wide settings is done from the “Menu”. Pressing the button enters the configuration/system
menu. From the main menu, the soft-keys at the bottom of the screen provide access to the configuration screens. See
Figure 2.1 .
Item Description
System View and change overall system information and parameters
Setup
Device measurement and measurement configuration settings
Cal Zero Zero the meter
Ratio Set Change the overall scaling factor for measurements
Figure 2.1 Configuration/System Menu and Functions
2.1 System Softkey
The first softkey is the “System” menu. Within this part of the menu tree information about the system, communication
settings, system settings like time and date, self test and setting the machine to the default state are available.
2.2 System Menu
From the system menu, system-wide functions are set and viewed. Figure 2.2 , details such as the LAN MAC address,
date, screen brightness, system initialization (settings reset), and self test are accessed here. See Table 2.2
2.3 System Information Menu
Information about the device is listed in this menu. See Figure 2.2 .
Note: When contacting B&K, use the serial number on the label.
2.4 Communication Configuration Menu
Available remote interfaces are RS-232, USBTMC, GPIB and LAN. For details about commands and use of the remote
interfaces, see the programming manual. The manual is found on the product page of the 5335B at www.bkprecision.com