BK Precision 4060B Series, Programming Manual

Page: 18 / 28

Common Command Introduction 18
Set Cardiac arbitrary wave output by name.
ARWV NAME, Cardiac
2.18.1 Notes:
Index Name Index Name Name Index Name Index
0 Sine 12 Logfall 24 Gmonopuls 36 Triang
1 Noise 13 Logrise 25 Tripuls 37 Harris
2 StairUp 14 Sqrt 26 Cardiac 38 Bartlett
3 StairDn 15 Root3 27 Quake 39 Tan
4 Stairud 16 X^2 28 Chirp 40 Cot
5 Ppulse 17 X^3 29 Twotone 41 Sec
6 Npulse 18 Sinc 30 Snr 42 Csc
7 Trapezia 19 Gaussian 31 Hamming 43 Asin
8 Upramp 20 Dlorentz 32 Hanning 44 Acos
9 Dnramp 21 Haversine 33 Kaiser 45 Atan
10 Exp_fall 22 Lorentz 34 Blackman 46 Acot
11 Exp_rise 23 Gauspuls 35 Gausswin 47 Square
Note: About the table: This table is just an example, the index may depend on the model,
you can execute “STL?” command to get them accurately.
2.19 Sync Command
Description Sets synchronization signal.
Command Syntax <channel>:SYNC <parameter>
<channel>={C1, C2}
<parameter>={ON, OFF}
Query Format <channel>:SYNC?
<channel>={C1, C2}
Query Response <channel>:SYNC <parameter>
Example Turn on sync function of channel one.
C1:SYNC ON
Read state of channel one sync.
C1:SYNC?
Return:
C1:SYNC OFF
2.20 Number Format Command
Description Sets or gets number format.
Command Syntax NBFM(NumBer_ForMat) <parameter>
<parameter> ={a parameter from the table below.}