36
the MENU selection display.
Full Display
3.2 ON Key
Use this key to control the main output signal. When the output is active, the ON key will be lit. By
default, this will be OFF (disabled) from a power-up.
3.3 Cursor Keys
Use these keys to move the cursor (when visible) either left or right. They are used in conjunction
with the rotary input knob to set the step size of the rotary input knob.
3.4 Rotary Input Knob
Use this knob to increase and decrease numeric values. The cursor indicates the low-order position of
the displayed value which changes when you rotate the knob (for straight numeric entries only). For
other types of data, the whole value changes when you rotate the knob.
3.5 Power-On Settings
At power-on, the waveform generator performs a diagnostic self-test procedure to check itself for
errors. If an error is found, an error code and text will appear in the display window. Other error codes
appear when you enter an invalid front-panel setting. For more information on error codes, see the
Error Indication section.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
