21
3
Operating Instructions
3.1 Menu Keys
These keys select the main menus for displaying or changing a parameter, function, or mode.
3.1.1 WAVEFORM Keys
These keys select the waveform output and display the waveform parameter menu (frequency,
amplitude and offset).
Figure 5 - Sine Menu
F1: Frequency
– Selects and displays the frequency. Change the frequency setting using the
cursor keys, rotary knob, or numerical keys.
F2: Amplitude
– Selects and displays the amplitude. Change the amplitude setting using the
cursor keys, rotary knob, or numerical keys.
F3: Offset
– Selects and displays the offset parameter. Change the offset by using the
cursor keys, rotary knob, or numerical keys. If a certain setting cannot be
produced, the waveform generator will display a “Setting Conflict” message.
Amplitude and offset settings interact and are bound by hardware restrictions.
To obtain the desired waveform, the amplitude and offset must satisfy the
following formula:
www.
GlobalTestSupply
.com
Find Quality Products Online at:
