SPP-R200II Command Manual
Rev. 1.00
BIXOLON
- 81 -
■
Modes 2 and 3 are executed according to the following procedures:
(RS, GS indicates the control code of MAXI CODE. y indicates the 2-byte numeric data.)
a) 9-byte data including
” [)>”,”RS”,”01”,”GS”,”yy” are regarded as the Header.
•
The next data following the Header is the Primary Message.
•
When printing, the Header is placed at the beginning of the Secondary Message.
b) When Header data is absent, the data is regarded as Primary Message.
c) In the Primary Message, GS is used as the separator that divides message into Postal code, ISO country code,
and Class of service. This GS is ignored.
d) All data of the Secondary Message is regarded as symbol data.
■
In mode 4, 5, 6, all of the data in the symbol storage area is regarded as Primary Message and Secondary Message.
■
For error correction codeword, the Reed-Solomon algorithm is employed.
■
The following data is automatically added during the encoding process:
•
Position sensor pattern
•
Position pattern
•
Error correction code text
•
Mode separator
•
Pad code text
■
In standard mode, the paper feed amount set by the paper feed setting command does not affect printing of the
symbol. The printing position returns to the left side of the printable area after printing the symbol.
■
In page mode, the printer stores the symbol data in the print buffer without executing actual printing.
■
The quiet zone is not included in the printing data. Be sure to include the adequate quiet zone for executing of this
command.
Differences:
None
