BIXOLON SPP-R200II, Command Manual

Page: 146 / 147

SPP-R200II Command Manual
Rev. 1.00
BIXOLON
- 146 -
BS M S PL PH fn3 m d1~dk
Function Set end sentinel characters
Code:
ASCII BS M S pL pH fn3 m d1~dk
Hex 08 4D 53 pL pH 33 m d1~dk
Decimal 08 77 83 pL pH 51 m d1~dk
Range: 3
≤ (pL+pHx256) ≤ 12
m = 49, 50, 51 32
≤d ≤127, k ≤ 10
fn = 50
Default: Track 1 :
“END”
Track 2 :
“END”
Track 3 :
“END”
Description:
■
m defines the track to set an End character.
■ d indicates the character to be set as an End character.
■
k indicates the number of characters to be used as End characters.
■ k is defined as (PL + PH x 256)
– 2.
■
If Multi-byte sentinel characters mode is set by fn1 after setting End.
characters, the End characters are added to the end parts of each track
data after reading card data and then the data is transmitted.
■ If d is set to Null 1-byte, it allows the setting of no End character.
■
The specified End characters are saved to non-volatile memory so the
setting value is not changed even though the printer is reset
Remarks:
None