Rev. 1.00
- 22 -
SLP-T400IIx/T403IIx
5-2 Stand-alone Configuration Mode
Various modes can be executed using buttons and LED only.
5-2-1 How to start stand-alone configuration mode
• The printer mode is set to Printer Setting Mode when the Pause button is depressed
for two seconds while in Print Standby Mode.
• Both LEDs change to orange color and a short buzzer sound will be produced, and the
printer enters into this mode.
• When the printer enters into this mode, the status of LED 1 and LED 2 are changed
sequentially.
• When the Feed button is depressed at specific LED color combination, the
corresponding printer operation will be selected.
5-2-2 List of supported functions
Sequence
number
LED 1
LED 2
Printer operation
Color Status
Color
Status
1
Green On
Green
Blink four times
Configuration Printing
2
Orange
Blink four times
Factory Reset
3
Red
Blink four times
Data Dump Mode
4
Orange On
Green
Blink four times
Auto Calibration Mode 2
5
Orange
Blink four times
-
6
Red
Blink four times
-
7
Red On
Green
Blink four times
-
8
Orange
Blink four times
-
9
Red
Blink four times
-
