Rev. 1.00
- 35 -
SLP-T400IIx/T403IIx
7. Appendix
7-1 Specifications
Item
Description
Printer
Printing Method
Thermal Transfer / Direct Thermal Printing
Dot Density
SLP-T400II : 203 dpi (8 dot/mm)
SLP-T403II : 300 dpi (11.8 dot/mm)
Printing Width
Max 104 mm
Printing Speed
SLP-T400II: 177.8 mm/sec (7ips)
SLP-T403II: 127 mm/sec (5ips)
Paper
Width
25 ~ 116 mm
Roll Max
130mm
Core 25.4~38.1mm
(1~1.5”)
Ribbon
Length / Width
Max 300m / 33 ~ 110mm
Type
Wax, Wax/Resin, Resin ,Outside type
Core
0.5” / 1”
AC
Adapter
Input Voltage
AC 100~240V
Frequency 50/60
Hz
Output Voltage
DC 24V
Usage
Conditions
Temperature
0 ~ 45
℃
(Operating)
-20 ~ 60
℃
(Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※
Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.
