Rev. 1.00
- 26 -
SLP-T400IIx/T403IIx
5-7 Auto Calibration Mode 2
Media type is configured after feeding one meter of paper for accurate paper detection in
this mode.
Paper type (gap or black mark) is identified automatically.
The printer enters error mode if paper detection fails. Error mode can be released by
opening and closing the cover.
Try Manual Calibration mode if paper detection fails in this mode.
Smart Media Detection will be disabled if paper detection is successful in this mode.
5-7-1 Procedure to run calibration
1) Depress the Pause button for two seconds during Print Standby Mode.
2) Both LEDs will change to orange color and buzzer sound will be produced, and the
printer will be set to Stand-along Configuration Mode.
3) Depress the Feed button at fourth LED sequence in 5-2-2 (LED 1 Orange / LED 2
Green – Blink four times) to start Automatic Calibration Mode 2.
