Rev. 1.00
- 29 -
SLP-T400IIx/T403IIx
5-11 Factory Reset
This function is used to reset the printer settings to factory default settings.
5-11-1 How to reset the printer
1) Depress the Pause button for two seconds during Print Standby Mode.
2) Both LEDs will change to orange color and buzzer will be produced, and the printer
will be put to Stand-Alone Configuration Mode.
3) Depress the Feed button at the second LED sequence in 5-2-2 (LED 1 Green / LED
2 Orange – 4 times Blink) to reset the printer to factory settings, and Smart Media
Detection function will be executed.
5-12 The Peel-Off
As a function that is used to peel-off labels, it is used only with label paper.
(After adjusting the peeler switch, power must be turned off and on in order for the
operation to be acknowledged.)
1) Open the paper cover.
2) Open the Ribbon Assembly.
3) Open the label peel-off cover and set the peeler switch to the ON position.
- Check to see that the LED has turned on.
LED
