Addr.: Unit 704, No. A3 Building, Tel: +86-592-6211770
3
rd
Software Park, Xiamen, China 361000 Fax: +86-592-6211727
www.bivocom.com
23
Don’t auto back to main server.
This setting will only work when both main and backup center are enabled, under this
work mode, if main center fails, TD210 will auto connect to backup center. If you choose
‘Y’, TD210 will check whether main center is recovery or not, if yes, it will switch to main
center, and disconnect with backup center. While if choose ‘N’, TD210 will not check
whether main center is recovery or not.
4.4.6 Custom Register String
You can configure it when network word mode is configure as CTCP and CUDP, but you
can also
choose not to configure it, which means register string won’t be sent.
Note: the length of register string is up to 70 bytes.
4.4.7 Custom Heartbeat String
You can configure it when network word mode is configure as CTCP and CUDP, but you
can also choose not to configure it, which means register string won’t be sent.
Note: the length of register string is up to 70 bytes.
4.4.8 Transfer Meaning
Y means Yes
N means No
When network work mode configured as FTCP, if choose Y, then TD210 will transfer
meaning ‘0xfd’ to ‘0xfd’ and ‘0xfe’, and ‘0xfe’ to ‘0xfd’ and ‘0xee’. If choose N, it is
transparent transfer.
4.4.9 TCP MTU
Set up the maximum number of data transmission for each TCP data packet.
