4
Parameter
Specifications
Measured fluids
Diesel fuel, Petrol,
Kerosene, Engine Oil
Cable length
7 000 mm / optional
Standard probe length
750 mm / optional
Housing protection class
IP-67
Connection socket ingress
protection rating
IP-67
Housing material
PA6(glass fiber polyamide)
Operating temperatures range
-40...+80 °С
Weight sensor equipment
920 g
Diameter of the measure probe
neck
35 mm
Size of the head of fuel gauge
(with the neck)
61.7x62x32(51) mm
GAUGE CONFIGURATION AND CALIBRATION
Introduction
Software
BI FLSensor Configurator
(hereinafter referred to as
the Configurator) is purposed for configuration, calibration and
diagnostics of capacitance fuel gauges.
You can receive the configurator in the Technical Support Service of
BITREK™
upon request.
Configurator provides an opportunity to perform the necessary
operations for the implementation of fuel gauges
BI FLSensor
in
transport GPS-monitoring systems: setting the level of an empty tank,
selection of the network address, setting the level of filtering data, fuel
level change tracking in real time.
The BI FLSensor Configurator software can be installed on PC or
laptops based on the Windows operation system.
To connect FG to computer you should have ad hoc adapter
BI
FLSensor Programmer
to connect it to the USB port.
If you have any question about the installation or operation of the
fuel gauges BI FLSensor or the software BI FLSensor Configurator, please
contact your equipment supplier or the technical support of
BITREK ТМ
.
Connection
The fuel gauge
BI FLSensor
is connected to the computer by
inserting the
BI FLSensor Programmer
unit to any USB port using a
USB cable (USB-A -USB-B).
