13
www.bitrek.com.ua
[email protected]
+380 44 507 02 07
(shall be requested from the operator, usually not required);
Password (none) - access password to GPRS
(shall be requested from the operator, usually not required);
IP (xxx.xxx.xxx.xxx) - Server IP address for data transmission;
PORT (xxxxx) - PORT of server for data transmission;
MODE (0) - mode of device operation (0 - TCP/IP connection).
Read the value of the parameter by its ID.
Command to be sent -
getparam ####
;
Parameter ID (####) consists of four digits and indicates the number of
the parameter. All configurable parameters are specified in the list of
Example of response: «Param ID #### Val: #»
, where:
Param ID - ID of requested parameters;
Val - current value of parameter.
Example of the command to request APN of the device (a parameter that
contains the APN device has ID 0242) - getparam 0242;
Example of response: «Param ID 0242 Val: gps.utel.ua».
List of control commands to operate the device
Table 5 - List of control commands
No.
Command
Description
Availability
of response
1
cpureset
Reload of device processor
No
2
rstallprof
Restoring of original state of profile
settings
No
3
deleterecords
Deletion of all saved records
No
4
setparam
####
Set the value of the parameter by
ID
Yes
5
boot #,#,#
Update of device software
Yes
6
setdigout #
Set the mode of operation of digital
output Out 1
Yes
7
ignitionoff
Activation of the safety locking of
ignition
Yes
8
ignitionon
Deactivation of the safety locking
of ignition
Yes
